Genuine Walbro TI Auto 525lph F90000285 Hellcat Fuel Pump E85 Compatible (Pump Only)
**GENUINE Walbro / TI Automotive Fuel Pump**
Dont Fall for the cheap fake knock off Walbro pumps that are floating around. These are guaranteed and proven to be one of the most reliable fuel pumps on the market!
TI Automotive is the builder of the most popular fuel pumps and modules for over 60 years under the Walbro brand name. We value this heritage and are proud to continue our legacy of reliability, performance and first-time fit.
Includes:
* (1) Walbro/TI Automotive F90000285 525lph Hellcat Fuel Pump
Walbro/TI Automotive F90000285 525LPH Hellcat Fuel Pump is the highest flowing intank fuel pump on the market, and is E85 safe to boot. Walbro/TI Automotive designed the pump to meet the requirements of modern turbocharged applications where a single 255LPH fuel pump is insufficient. The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades.
The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps.
The Walbro/TI Automotive 525LPH pump can flow anywhere from 15-120psi (the bypass valve is set higher than Walbro's previous fuel pumps, which were around 85psi). Final fuel pressure is determined by your fuel pressure regulator. The overal size is very similar to Walbro's previous generation GSS340/GSS341/GSS342, however the base is slightly enlarged as shown in the pictures.
• Highest flow in-tank brushed fuel pump offering from TI Automotive
• Featuring award winning DCSS technology
• E85 compatible
• Internal check valve — prevent fuel system pressure bleed down — prevent extended cranks
• High pressure relief setting — support supercharger and turbo applications
• Capable of supporting 900+HP at 60PSI naturally aspirated applications
• Flush mountable to existing hanger with installation kit 400-1168 ( Available to purchase separately ) 400-0085 Install kit has been discontinued and replaced by 400-1168
**NOTE: You will need to upgrade to at least a 30 amp Relay for this fuel pump as it draws more power than your average fuel pump. This is an aftermarket fuel pump, and some modifications may be required to get it to fit in your existing hanger/basket.
